35 ft towable boom lift rental

35 ft towable boom lift rental
35 ft towable boom lift rental
35 ft towable boom lift rental
35 ft towable boom lift rental
35 ft towable boom lift rental
Lift height
Work height
Load capacity
Platform size
Overall size
Power supply
AC/DC/Petrol /Diesel
Power supply
Control method
The boom lift’s precise positioning capability gives operators a safe and sturdy platform to focus on work over extended periods of time. Its tough treading can navigate outdoor terrain, making it ideal for outdoor maintenance and construction projects. Because it can safely bypass obstructions, the articulating boom lift is a great choice for construction workers, steel erectors, or general contractors

35 ft towable boom lift rental introduce:

TUHE jib lifts are trusted on construction sites in Singapore for a number of reasons. With telescoping (straight) and articulated models, they offer solutions for every need. Industry-leading safety features, fast lift speeds and easy maintenance make these mobile overhead work platforms a great choice for any job site. TUHE cantilever lifts have platform heights up to 180 feet.

The articulated arm lift platform is a lifting device used for high-altitude operations. It can cross obstacles and perform high-altitude operations. When the platform is lifted to any position, it can be operated while walking. It has a compact structure and flexible steering. access and crowded work areas. Backup power unit, operable work platform reset, convenient transportation, can be towed anywhere. Easy-to-identify operation panel, multiple mechanical, electrical and hydraulic safety protection, advanced integrated hydraulic and electrical integration system.

The crank lift platform is divided into: trailer lift platform, vehicle lift platform, crank arm aerial work platform, self-propelled lift platform.

TUHE boom lift adopts folding working arms (two-section boom, three-section boom), the working height is 12-18 meters, the rated load of the platform is 200kg, the lifting arm can be rotated 360 degrees, and the turntable and working bucket can be operated at both places. This product has simple operation structure, convenient operation, safety and reliability, and beautiful appearance. It is an aerial work equipment with optimized safety and work efficiency. Four hydraulic outriggers are equipped with the vehicle, and the type of outriggers is Japanese type to ensure the stability and safety of the whole vehicle during operation.

Articulating boom aerial work vehicles are widely used in installation, maintenance and climbing operations in municipal, electric power, street lamps, advertising, communications, photography, gardens, transportation, docks, airports, ports, large industrial and mining enterprises and other industries.

The articulated arm lift platform is suitable for various rugged terrains in the field, with a wide range of space operations. It is mainly used for construction machinery and equipment in construction, bridge construction, shipbuilding, airports, mines, port terminals, communication and power facilities, and outdoor advertising.

35 ft towable boom lift rental.jpg

35 ft towable boom lift rental works:

The hydraulic oil is formed by the vane pump to a certain pressure, and enters the lower end of the hydraulic cylinder through the oil filter, flameproof electromagnetic reversing valve, throttle valve, hydraulic control check valve and balance valve, so that the piston of the hydraulic cylinder moves upwards and lifts the weight. The oil returned from the upper end of the liquid cylinder returns to the fuel tank through the explosion-proof electromagnetic reversing valve, and its rated pressure is adjusted through the overflow valve, and the reading value of the pressure gauge is observed through the pressure gauge.

The piston of the hydraulic cylinder moves downward (ie, the weight drops). The hydraulic oil enters the upper end of the hydraulic cylinder through the explosion-proof electromagnetic reversing valve, and the return oil at the lower end of the hydraulic cylinder returns to the fuel tank through the balance valve, hydraulic control check valve, throttle valve, and explosion-proof electromagnetic reversing valve. In order to make the heavy objects descend smoothly and the braking is safe and reliable, a balance valve is set on the oil return road to balance the circuit and maintain the pressure, so that the descending speed is not changed by the heavy objects, and the flow rate is adjusted by the throttle valve to control the lifting speed. In order to make the braking safe and reliable and prevent accidents, a hydraulic control check valve, namely a hydraulic lock, is added to ensure safe self-locking in the event of an accidental burst of the hydraulic pipeline. An overload sound alarm is installed to distinguish overload or equipment failure.

How to choose the right 35 ft towable boom lift rental :

So you need a boom lift for your workplace, but which one is best for your job? Before renting a jib lift, make sure you consider the following:

Space Constraints: Measure the space your elevator is passing through. A narrow workplace will require an aerial lift with a different mechanism than an open space workplace.

Weight Capacity: Estimate the number of workers and material weight you will be loading on the boom lift to prevent overloading.

Type of movement: Boom lifts come with different handling mechanisms. These lifts can be single-mast or multi-mast, meaning its movement is two- or three-dimensional.

Power: In some jobs, there may be regulations limiting the amount of exhaust gas emitted by the engine. Diesel is a popular choice because of its longevity and price point. For indoor work, electric lifts are a better choice because they are quieter and have zero emissions.

Workplace Conditions: What is the terrain like at your worksite? Steep and tricky? Or delicate and soft? This will determine the correct cantilever lift for your terrain. Our boom lifts are equipped with tires of different diameters. Flotation, non-marking, standard pneumatic, solid rubber and foam filling are just a few options for you to choose from. We can also customize knuckle boom lifts according to your requirements. 

Aerial working platforms like boom lifts cover a wide variety of applications. Whether you are looking for one for your large construction project or for your warehouse, you’ll want to consider the strengths of each type of boom lift so that you get the most bang for your buck. Not sure which construction lift best serves your need? Contact us here! Our boom lift experts will be in touch with you in the next few hours to help you with your project!

35 ft towable boom lift rental Bicycle Switch:

In addition to the emergency stop operation, the operation of the operating device is only possible if the bottom switch of the lower work bucket is operated (the state where the foot switch is depressed) (except that the foot pedal is not installed). The operation stop foot in the bucket should jump the operation switch. The pedal state must not be tied up with a rope to make it dangerous to use under the switch. This is easy to cause misuse, very many.

1. The operator on the working bucket of the crank arm lift truck needs to stop the action of the working arm in order to avoid danger.

2. When the control lever of the crank lift truck is out of control.

If the working arm of the crank lift truck still descends slowly after the emergency stop switch is turned on, it can be considered that the oil cylinder is naturally descending. At this time, the operating lever can be pulled in the opposite direction to the working arm to avoid its danger. Quickly retract the working arm and stop working. After the operation is stopped due to abnormal operation, the operation should be interrupted, and the after-sales service department should be contacted immediately for maintenance.

3. Operation of the working arm of the crank lift truck

When operating with three working arm operating levers, the lifting speed can be adjusted by changing the reverse angle of the operating levers. If the hydraulic oil temperature drops by 10°C, the working arm of the crank arm lift truck will shrink by 30mm. This parameter changes with the elongation of the working arm, the lifting angle and the lubricating state of the working arm.

The following measures can be taken to prevent the working arm of the boom lift truck from contracting:

1.When the temperature of the hydraulic oil is high, the telescopic and lifting operations of the working arm are not performed.

2.After an appropriate clearance time, the boom telescopic and lifting operations are carried out.

3.Swing operation of the swing arm lift truck

Use the "work bucket pendulum" knob. It can realize left 90°~right 90° swing. The operation of this switch is not subject to any restrictions and can be actuated at any time.

Automatic recovery operation of crank arm lift truck

4. Press the automatic recovery switch, the working arm will be retracted to the retractable arm switch first, then raised or lowered to 10°, and finally returned to the "0" position.

In the dangerous situation of the work triangle, make your way up and down. Otherwise, it is easy to cause a crash from the car. On the left side of the vehicle (forward direction) - walking platform - on the cab roof steps - - if there is no anti-skid falling net is protective or slippery - when working, ice is dangerous , easy to slip case, non-slip case. If there is oil accumulation in the iron sheet, the ice cubes should be removed or cleaned first, and then be cleaned upside down, wiped off the accumulated water and cleaned when working in the work bucket.


Q1: What is a 35 ft towable boom lift?

A1: A 35 ft towable boom lift is a versatile aerial work platform that provides a vertical reach of up to 35 feet. It can be easily towed to different job sites and is commonly used for tasks like maintenance, construction, tree trimming, and more.

Q2: How does a towable boom lift work?

A2: A towable boom lift has a telescopic or articulating arm that extends vertically, providing access to elevated areas. It is mounted on a trailer and can be hitched to a vehicle for transportation. The lift can be controlled from the platform, allowing operators to maneuver to different heights and positions.

Q3: What are the advantages of renting a 35 ft towable boom lift?

A3: Renting a towable boom lift offers flexibility and cost-effectiveness. You can access elevated work areas without the commitment of purchasing the equipment, and rental options suit various project durations and budgets.

Q4: What types of projects is a 35 ft towable boom lift suitable for?

A4: A 35 ft towable boom lift is suitable for a range of tasks, including exterior building maintenance, signage installation, painting, roof repairs, and other tasks that require safe access to elevated areas.

Q5: How do I choose the right towable boom lift for my needs?

A5: Consider factors like the maximum working height, platform capacity, and outreach required for your specific tasks. It's recommended to consult with rental professionals who can assist you in selecting the appropriate lift model.

Q6: What safety measures should I follow when operating a towable boom lift?

A6: Prioritize operator safety by wearing appropriate personal protective equipment, following proper training, and adhering to manufacturer guidelines. Avoid overhead obstacles and unstable surfaces, and be aware of your surroundings.

Q7: How do I transport a 35 ft towable boom lift?

A7: Towable boom lifts are designed to be transported on a trailer, often with a standard hitch. Check your vehicle's towing capacity and ensure proper hitching and securement before transporting the lift.

Q8: Can anyone operate a towable boom lift?

A8: Operating a towable boom lift requires proper training and certification. Ensure that operators are familiar with the controls, safety procedures, and limitations of the equipment.

Q9: What does the rental cost of a 35 ft towable boom lift typically include?

A9: Rental costs usually include the use of the equipment for a specified period, maintenance, and basic insurance. Delivery, fuel, and any additional attachments or accessories may incur extra charges.

Q10: How do I schedule a 35 ft towable boom lift rental?

A10: Contact rental companies in your area to inquire about availability, rates, and rental terms. Provide details about your project requirements to receive a suitable quote.

Q11: What if I need assistance while using the towable boom lift?

A11: Rental companies often provide customer support for technical assistance or troubleshooting during the rental period. They can guide you through any issues you encounter.

Q12: Is a 35 ft towable boom lift suitable for indoor use?

A12: While towable boom lifts can be used indoors, their primary advantage lies in outdoor applications due to their size and reach. Make sure the indoor space can accommodate the lift's dimensions and weight capacity.

In summary, a 35 ft towable boom lift rental offers a practical solution for accessing elevated work areas in various industries. Ensure safety, proper training, and adherence to guidelines while operating the equipment to ensure a successful and efficient project.

Send a Message

If you want to ask anything just fill in the form below and send us.

Name: Maloney        time:2022-03-30 15:13:24
Wow what a deal for these lifts! You couldn’t ask for more.

Name: Magee        time:2022-03-30 15:12:11
Purchased many times. The lift is as good as before.

Write a review

Featured Products

Similar products

New Products

Latest Released Products