With the improvement of living standards, many families have their own houses. For the convenience of going upstairs and downstairs, or for the elderly or disabled, or for the convenience of daily carrying things upstairs and downstairs, a custom home lift will be very practical. It can not only meet the needs of daily life, but also be 100% customized according to the size of the house and your own taste.
Home lift price uk, this home lift is for personal house or villa use, it has strong structure and stable running state. We can customize home elevator according to your house height and installation size. This home lift can be used indoors or outdoors, it's made of high quality stainless steel, aluminium alloy and tempered glass.
1. How big is the custom lift car?
We are custom-made products without standard size. We will tailor them to you completely according to your reserved opening plan. In short, we will provide you with lift equipment of corresponding size according to the size of your opening. However, it is recommended that the car size should not exceed 1 * 1.2m
2. What is the load of the custom home lift?
The rated load is 400 kg
3. Do I need to make steel structure to fix the custom home lift?
No, hydraulic lifts can be installed without well. There are many fixing methods, such as wall, ground, floor and ceiling. You can also send us the photos of the site. After seeing the site, we will give you a plan to see whether it needs to be reinforced with steel structure.
4. Can I install the custom home lift outdoors?
Yes, we can customize professional aluminum alloy frame and toughened glass shield. It's no problem to install it outdoors.
5.Elevator lifts has the main characteristics :
1.Usual motor or silent motor
2.Digital display button
5.UPS battery charge for power-cut
6.With cabin or not,push door or fold door.
6.The safety measures for Commercial lift elevator are as follows:
1. Fall loss protection function, when the elevator suddenly decreases, the safety gear can firmly secure the elevator on the guide, so that the elevator car displacement does not exceed two centimeters
2. Touching bottom sensor, when an obstacle is encountered during the decline in the car, the car can stop running immediately
3. The trip switch, our elevator has three limited switches to prevent elevator
4. Electromagnetic lock function, when the elevator is running, the door is not opened, and when the elevator does not reach the destination floor, the landing door will not be opened.
5.UPS backup power, when power failure, it will make the cabin to get to the ground.
6. Silent pump station, it is quiet during lifting and lowering.
7.best home lifts uk Hydraulic elevator and its cost
Hydraulic elevator is a customized product according to your building size. It is mainly made up of cabin part, cylinder part and T-rail part. The smallest size we need is 1000x700mm or 3.3x2.3ft. And the biggest size is 1500x1500mm or 4.9x4.9ft. If you have a much bigger size, we can add extra assist guide rail to make a bigger hydraulic elevator. Usually, the standard cabin size is 1200x1000mm or 3.9x3.3ft, and this will need about 1400x1450mm or 4.6x4.75ft space size for installation. We will provide you professional installation guide and video, so you don’t need to worry about how to install our hydraulic elevator at all. As for the electricity part, we have our own proprietary technology control cabinet. It is all English and number display, and it is plug-in type. You will find how easy to connect the wires of our hydraulic elevator.
This model has a cheaper price and easy installation steps, but its speed is a little slower than traction elevator, the speed is 0.3m/s. This model doesn’t require too much for the installation environment, it doesn’t need a machine room or a pit, it only requires at least 1.8m overhead height, and the best is 2.6m. Our hydraulic elevator can be installed indoors, outdoors, near to a wall or in the middle of stairs. We can customize it according to the space size you have, and we can also provide a glass elevator shaft to protect the elevator and people well. Our glass shaft is made of high strength aluminium alloy and tempered glass. The cabin can be made of stainless steel or tempered glass, we have different designs for the cabin, and all the standard designs are free, you will find your favorite one. There is light curtain on the cabin door, if any part of your body is out of cabin during elevator moving, the elevator will stop immediately to protect you. The main structure is made of hot galvanizing steels, which more durable and not easy to get rusty than normal steels.
The standard landing door is manual swing door, it can’t open while the elevator is moving, or the elevator can’t move if the door is not closed well. We also have other landing door options, like automatic swing door, automatic middle opening door and automatic sliding door. But of course, the price is different, like automatic swing door is about USD 600 - USD 800, automatic sliding door is about USD 1,500 - USD 2,000.